Model Arduino BEE adapter V1.2 Quantity 1 Color Blue Material Semi-fiberglass board FR4 Features Bee Adapter V1.2 is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232RL IC It can be used for programming or communicating with board which basic Arduino but without USB interface like Sniffer Nano. On the other hand you may connect your PC to various wireless applications via the BEE compatible modules. Application The Adapter also could support XBee interface. Packing List 1 x Adapter board
The Adapter also support XBee interface; A product for Arduino that works with official Arduino boards.
Xbee module is a ZigBee wireless module technology communicate with the microcontroller through inter-serial; Can very quickly connect device to a ZigBee network; Adopts 802.15.4 protocol stack; Supports point-to-point and point-to-multipoint communications and networking; Antenna is wire antenna simple and convenient. The adapter also could support XBee interface.
Features: FT232IC is a USB to serial chip chips are widely used in the SCM system that without USB interface for the expansion of the USB interface. Such as the Arduino known with this chip. The module is through a single-chip motherboard without the need for the XBee or BTBee of PC link design; Can directly use the computer to control XBee or BTBee. Reset button for BEE modules. 3.3V and 5V dual power output. 3.3V and 5V IO compatible USB. 2.0 protocol. BitBang mode ready Application. USB Serial adapter to communicate with TTL/CMOS level Serial devices. Programmer for Arduino and compatible boards. USB Adapter of BEE modules for PC wireless function.
FT232RL FTDI USB To TTL Serial Converter Adapter Module For Ardui is available now from our UK warehouse Free shipping to UK in 3-6 business days ship to other European countries in 7-10 days FT232RL FTDI USB To TTL Serial Converter Adapter Module For Arduino Feature: Chip: FT232RL Draw out all signal port of FT232RL chip RXD / TXD transceiver communication indicator USB power supply, can choose 5V or 3.3V, set by jumper With over current protection, using 500mA self-restore fuse Pin definition: DTR, RXD, TX, VCC, CTS, GND Pitch: 2.54mm Size: 36 x 18mm (L x W) Interface: Mini USB Note: This chip is not orignal, do not have EEPROM, can not invert the signals. Package included: 1 x FT232RL USB to serial converter module
FT232RL chipset all signal ports education TTL/CMOS electrical level; RXD/TXD indicator; USB power supply selectable 5V or 3.3V port
Color: Blue - Material: PCB + metal - FTDI FT232RL chipset - Leads to the FT232RL chip signal port TTL / CMOS level - RXD / TXD transceiver communication indicator - Powered by USB port 5V or 3.3V optional - Perfect for your Funduino DIY project - Driver link: http://www.ftdichip.com/Drivers/VCP.htm - (for x86):http://www.ftdichip.com/Drivers/CDM/CDM20802%20WHQL%20Certified.zip - Datasheet: http://www.ftdichip.com/Products/ICs/FT232R.htm
Color custom10000 Brand TENYING Model XB232 Quantity 1 Piece Material FR4 + copper wire coil Chipset BC417 + FT232RL English Manual / Spec No Other Features With CFG button keep pressing will enter HC-05 AT mode; With LINK and SYS user can know the working state of the module; External size 100% compatible with XBEE module series can be used for short distance high speed serial communication(10~15 meters distance suitable for indoor intelligent car wireless communications very well); Master-slave integration module which can be configured to host at any time or from the machine flexible and convenient! Ultra low-cost replace XBEE module; Packing List 1 x TYHC05 Bluetooh module 1 x Adapter board
Adopts FT232RL chip of FTDI company; TTL/CMOS level; RXD / TXD indicator; USB powered 5V / 3.3V for choice.
XBee Shield with Logic Level Converter is an enhanced serial port XBee module breakout board.It can directly plug in with Arduino and use D0-D3 of the basic board to connect with the XBee module.Its SPI and UART bus is convert the logic level 5V to 3.3Vand it's stackable you can connect the 3.3V IO module or shield to this shield directly. The Logic Level Converter show in the below allowed your Arduino board connect to different IO logic level module safety. - With Logic Level Converter (3.3V to 5V or 1.8V to 5V or 1.8V to 3.3V) - With CC1101 module connecter - Provide maximal 800mA under 3.3V - 4 indicator LED (RSSI ASS Din Dout) for XBee - Switchable of communication with FTDI-USB /Base board - Full 2.54mm break out for XBee - With wireless program hardware interfaces - Reset button for base board - Stackable interfaces
Model N/A Quantity 1 Color Black Material FR4 Features Capable of controlling 2 relays with XBBee/BTBee CC1101 and nRF24L01 wireless interface Application Used to control the lighting electrical and other equipments; easy to expand with the Arduino board or other MCU board PIC ARM and MSP430. Packing List 1 x 2 channel relay shield module